{"product_id":"takstar-px-10-kenya","title":"Takstar PX-10 1500W x2 Professional Power Amplifier for PA","description":"\u003cp\u003eThe Takstar PX-10 gives churches, event companies and touring bands serious, dependable power for passive PA speakers and subwoofers, packed into a standard 2U rack unit.\u003c\/p\u003e\u003cp\u003eThe PX-10 takes the signal from your mixer and delivers up to 1500W per channel into 4 ohms, or 3000W bridged into 8 ohms. That is enough headroom to push full-range cabinets or a pair of subs at a large service, wedding or outdoor event without straining, so your sound stays clean when the room is packed.\u003c\/p\u003e\u003cp\u003eLow distortion under 0.03% and a damping factor of 300 keep vocals clear and bass tight and controlled. A full set of protection circuits, from soft start to thermal cut-out, guards both the amplifier and your speakers, and the two-step speed fan keeps it cool through long sets.\u003c\/p\u003e\u003cp\u003eIn Kenya, the PX-10 suits worship teams powering main speakers and subs, event and hire companies running weddings, conferences and concerts, and venues building a permanent rack. Its 483mm rack width fits standard flight cases for easy transport between gigs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1500W per channel into 4 ohms gives you the headroom to drive large PA cabinets and subwoofers at full events.\u003c\/li\u003e\n\u003cli\u003eBridge mode delivers 3000W into 8 ohms, so one amplifier can power a single large subwoofer for deep, powerful bass.\u003c\/li\u003e\n\u003cli\u003e1050W per channel into 8 ohms suits standard 8 ohm speakers used in churches and halls.\u003c\/li\u003e\n\u003cli\u003eDistortion below 0.03% keeps vocals, keyboards and worship music sounding clean and natural.\u003c\/li\u003e\n\u003cli\u003eA damping factor of 300 gives tight, controlled low end with less boomy bass.\u003c\/li\u003e\n\u003cli\u003eSoft start, short circuit, limiter, DC fault, AC fuse and thermal protection help safeguard your speakers and the amplifier itself.\u003c\/li\u003e\n\u003cli\u003eA two-step speed fan keeps the amp cool during long services and all-night events.\u003c\/li\u003e\n\u003cli\u003eThe standard 2U rack size fits neatly into flight cases and equipment racks.\u003c\/li\u003e\n\u003cli\u003eBinding post outputs give secure speaker connections for both stereo and bridge setups.\u003c\/li\u003e\n\u003cli\u003eBalanced inputs reduce noise and hum over long cable runs from the mixer.\u003c\/li\u003e\n\u003cli\u003eSelectable 1.0V or 1.4V input sensitivity lets you match the amp to your mixer's output level.\u003c\/li\u003e\n\u003cli\u003eA 20Hz to 20kHz frequency response covers the full range from deep bass to crisp highs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTechnical Specifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAttribute\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eValue\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eTakstar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003ePX-10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eProfessional power amplifier\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRated output, stereo 8 ohms (1kHz, 1% THD)\u003c\/td\u003e\n\u003ctd\u003e1050W + 1050W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRated output, stereo 4 ohms (1kHz, 1% THD)\u003c\/td\u003e\n\u003ctd\u003e1500W + 1500W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRated output, bridge 8 ohms (1kHz, 1% THD)\u003c\/td\u003e\n\u003ctd\u003e3000W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePeak power, stereo 8 ohms\u003c\/td\u003e\n\u003ctd\u003e2100W + 2100W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePeak power, stereo 4 ohms\u003c\/td\u003e\n\u003ctd\u003e3000W + 3000W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePeak power, bridge 8 ohms\u003c\/td\u003e\n\u003ctd\u003e6000W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput connectors\u003c\/td\u003e\n\u003ctd\u003eBinding posts for stereo and bridge output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency response\u003c\/td\u003e\n\u003ctd\u003e20Hz to 20kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput sensitivity\u003c\/td\u003e\n\u003ctd\u003e1.0V \/ 1.4V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput impedance\u003c\/td\u003e\n\u003ctd\u003e20k ohms balanced, 10k ohms unbalanced\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal-to-noise ratio\u003c\/td\u003e\n\u003ctd\u003e100dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTHD\u003c\/td\u003e\n\u003ctd\u003eLess than 0.03% (8 ohms, 1kHz, half power)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChannel separation (8 ohms, 1kHz)\u003c\/td\u003e\n\u003ctd\u003e80dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamping factor (1kHz, 8 ohms)\u003c\/td\u003e\n\u003ctd\u003e300\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSlew rate\u003c\/td\u003e\n\u003ctd\u003e20 V\/us\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProtection\u003c\/td\u003e\n\u003ctd\u003eSoft start, short circuit, limiter, DC fault, AC line fuse, thermal cut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCooling\u003c\/td\u003e\n\u003ctd\u003eTwo-step speed fan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003eAC 220 to 240V, 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet weight\u003c\/td\u003e\n\u003ctd\u003e16.5 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (W x D x H, as listed by Takstar)\u003c\/td\u003e\n\u003ctd\u003e483 x 88 x 410 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMPN\u003c\/td\u003e\n\u003ctd\u003ePX-10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eQ:\u003c\/strong\u003e Should I run the Takstar PX-10 in stereo or bridge mode?\u003cbr\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Use stereo mode to power two speakers, giving 1500W each at 4 ohms or 1050W each at 8 ohms. Use bridge mode to send 3000W into a single 8 ohm speaker, which is ideal for one large subwoofer. Always check your speaker's power rating and impedance first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ:\u003c\/strong\u003e What power supply does the Takstar PX-10 need?\u003cbr\u003e\u003cstrong\u003eA:\u003c\/strong\u003e It runs on standard Kenyan mains power, AC 220 to 240V at 50Hz. For outdoor events on a generator, use a stable supply and switch the amp on last and off first to protect your speakers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ:\u003c\/strong\u003e Can I get the Takstar PX-10 delivered in Nairobi today?\u003cbr\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Yes. Same-day delivery is available within Nairobi CBD and major suburbs for orders placed before the daily cut-off. Contact us to confirm stock and lock in your delivery window. We also deliver countrywide across Kenya, with lead times depending on your location.\u003c\/p\u003e","brand":"Takstar","offers":[{"title":"Default Title","offer_id":41382932119624,"sku":"PX-10","price":54999.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0573\/7971\/7192\/files\/takstar-px-10-1500w-x2-professional-power-amplifier-for-patakstar-px-10-1500w-x2-professional-power-amplifier-for-pa-8775597.png?v=1790667668","url":"https:\/\/www.zamaraudiosolutions.com\/products\/takstar-px-10-kenya","provider":"ZAMAR AUDIO SOLUTIONS ","version":"1.0","type":"link"}